Assessing desertification by using soil indices   总被引：1，自引：0，他引：1  

Ali Khanamani  Hassan Fathizad  Haji Karimi  Saeed Shojaei 《Arabian Journal of Geosciences》2017,10(13):287

Desertification generally refers to land degradation in arid, semiarid, and dry semi-humid climatic zones. It involves five principal processes: vegetation degradation, water erosion, wind erosion, salinization and waterlogging, and soil crusting and compaction. The aim of this study is assessing desertification using soil criteria. For this purpose, nine indices including sodium absorption ratio (SAR), soil gypsum percentage, soil texture, the content of HCO₃ ^?, the percentage of the organic matter, electrical conductivity (EC), pH, the content of the soil sodium, and chloride were used. The soil samples were taken in the north of Zayandeh-Rood River in Isfahan province of Iran, using soil data randomly sampled in a depth of 0–20 cm. After assessing the normality of the samples using Kolmogorov-Smirnov test, indices were imported into GIS environment and interpolated with IDW and normal and discrete kriging methods for delineating soil characteristics maps based on MEDALUS model. In this model, the data were firstly changed from 100 to 200. Thus 100 and 200 are estimated as the best and worst quality, respectively. Then the final map of soil criteria has been created by geometric mean of its indicators. The results showed that the maximum area is related to the medium class of desertification and is equal to 44,746 ha. The areas of severe and very severe classes of desertification are equal to 30,949 and 351 ha, respectively. The results also revealed that the indices of the organic matter and soil gypsum percentage are the most influential indices which affect desertification phenomenon.  相似文献   

Paleoenvironment of geomorphic surfaces of an alluvial fan in the eastern Isfahan,Iran, in the light of micromorphology and clay mineralogy     

Omid Bayat  Hamidreza Karimzadeh  Alireza Karimi  Mostafa Karimian Eghbal  Hossein Khademi 《Arabian Journal of Geosciences》2017,10(4):91

Alluvial fans are one of the most important landforms in geomorphological and paloenvironmental studies. The objective of this study was the application of clay mineral assemblages and micromorphological properties of the studied paleosols in the geomorphic surfaces of an alluvial fan in the eastern Isfahan as proxies for paleoenvironmental and paleoclimatic changes. Micromorphology, X-ray diffraction, and scanning electron microscopy approaches were used to study the representative pedons. The results indicated that the illuviation process in the calcareous soils of the arid regions of the eastern Isfahan was probably in response to Quaternary moist conditions. There was no significant difference between clay coating properties of the studied relict and buried paleosols. Clay mineralogical study suggested that kaolinite and illite were inherited from the parent materials, while smectite and palygorskite were formed in the soil environment. Paleoargillic horizon was characterized by smectite and calcic (especially the calcrete) horizons were dominated by palygorskite. Palygorskite was accumulated by both neoformation and illuviation processes. High clay content, high intensity of smectite peak, and activity of the illuviation process in paleoargillic horizon demonstrated the seasonality of climate (rainfall) even in the moist periods of Quaternary in Central Iran. Clay mineralogical assemblages suggested a trend of increasing environmental aridity in the study area. This study, therefore, highlighted the role of clay mineralogical investigations in arid lands’ geomorphological and paleoenvironmental researches.  相似文献   

Applying an optimized proxy-based workflow for fast history matching     

Mojtaba Karimi  Ali Mortazavi  Mohammad Ahmadi 《Arabian Journal of Geosciences》2017,10(21):462

History matching is still one of the main challenging parts of reservoir study especially in giant brown oil fields with lots of wells. In these cases, history matching with conventional manual technique needs many runs and takes months to get a match. In this work, an innovative approach was suggested for fast history matching in a real brown field. The workflow was employed based on an optimized proxy model for history matching of a field consisting of 14 active wells with multiple responses (which are production rate and pressure data) in the south part of Iran. The main important features of the proposed algorithm were defining a proxy model which is response surface method in which 21 model parameters were incorporated based on cubic centered face method. The proxy model was then optimized by one of the most famous algorithms which is genetic algorithm. Proxy model was successfully performed using 256 samples leading into p- value of 0.531 and R ² of 0.91 dataset. As a result, the proposed workflow and algorithm showed good and acceptable results for history matching of studied real model.  相似文献   

Cometabolic Degradation Kinetics of Trichloroethylene Based on Toluene Enhancement by Encapsulated Burkholderia cepacia G4          下载免费PDF全文

Shanawar Hamid  Muhammad T. Amin  Abdulrahman A. Alazba  Umair Manzoor  Muhammad N. Amin 《洁净——土壤、空气、水》2014,42(11):1642-1649

  相似文献   

Investigation of Various Parameters Effect on Cerchar Abrasivity Index with PFC3D Modeling     

Akbar Balani  Hamid Chakeri  Ghodrat Barzegari  Yilmaz Ozcelik 《Geotechnical and Geological Engineering》2017,35(6):2747-2762

The Cerchar test is one of the appropriate and routine tests for determining the rock abrasion; but as for the costs and pin wear measurement errors in laboratory procedures and lack of access to laboratory equipment, using of numerical modeling can lead to use of greater number of samples required during the course of mechanized excavation and reduce the costs and errors in the laboratory test. In this study, the Cerchar abrasivity test was modeled using PFC3D (Particle Flow Code in 3 Dimensions) software. In order to verify the simulation results, Cerchar laboratory test results obtained by Rostami (Rock Mech Rock Eng 47(5):1905–1919, 2014) were compared with the numerical modeling results. In modeling studies, the effects of some parameters such as apply load, test speed, pin hardness and scratching distance on pin wear were investigated. As a conclusion of the study, good agreement between modeling and experimental results was obtained for a given condition. As in the experiment with various loads in both laboratory tests and modeling, with increasing applied load the Cerchar abrasivity index also increased in the experiment with Rockwell hardness HRC (An abbreviation for Rockwell Hardness measured on the C scale. The Rockwell test determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preload, that on the C scale use from a indenter with 120° cone and 150 kgf load) 42.  相似文献   

An alternative direct method towards mean dynamic topography computations     

Roohollah Karimi  Alireza A. Ardalan 《Ocean Dynamics》2010,60(3):555-562

An alternative “direct method” to “mean dynamic topography” (MDT) computations using satellite altimetry-derived “mean sea surface” (MSS) and “global geopotential model” (GGM), without direct application of the geoid, is devised. The developed approach, which is based on derivation of an equipotential surface of the gravity field of the Earth that fits to global MSS in least squares sense, is formulated via a constrained optimization problem. The validity of our method is numerically tested by computing a global MDT model based on DNSC08 MSS model and EGM2008 GGM as input data.  相似文献   

On correct application of one-step inversion of gravity data     

Alireza A. Ardalan  Roohollah Karimi 《Studia Geophysica et Geodaetica》2013,57(3):401-425

One of the main problems on the numerical solution of integral equations is the resolution of input data. Among the integral equations used in geodesy we have the “onestep inversion” based on the first derivative of the Poisson integral, which transforms gravity values on the Earth’s surface to the gravity potential on the reference ellipsoid. In this study, it is shown that the required spatial resolution of the input gravity data on the Earth’s surface for correct one-step inversion depends on the height of the computational region, the fact that if overlooked can cause totally wrong results. Consequently the following two major questions are posed: (i) How could one know whether the spatial resolution of the input gravity data for correct one-step inversion is sufficient? (ii) What should be done if the spatial resolution is not sufficient? By studying the behaviour of the integral kernel, an algorithm is presented which enables an appropriate answer to the former question. In order to address the latter question, a method is proposed to modify the integral kernel which overcomes the adverse effect of insufficient spatial resolution of the input gravity data. Our answers, which possess the novelty of the study, are numerically verified by means of real and simulated gravity data. The numerical results approve the efficiency of the proposed method in solving the problem of insufficient spatial resolution of the input gravity data for correct one-step inversion.  相似文献   

Isolation and characterization of alkane degrading bacteria from petroleum reservoir waste water in Iran (Kerman and Tehran provenances)     

Mehdi Hassanshahian  Mohammad Ahmadinejad  Hamid Tebyanian  Ashraf Kariminik 《Marine pollution bulletin》2013

Petroleum products spill and leakage have become two major environmental challenges in Iran. Sampling was performed in the petroleum reservoir waste water of Tehran and Kerman Provinces of Iran. Alkane degrading bacteria were isolated by enrichment in a Bushnel–Hass medium, with hexadecane as sole source of carbon and energy. The isolated strains were identified by amplification of 16S rDNA gene and sequencing. Specific primers were used for identification of alkane hydroxylase gene. Fifteen alkane degrading bacteria were isolated and 8 strains were selected as powerful degradative bacteria. These 8 strains relate to Rhodococcus jostii, Stenotrophomonas maltophilia, Achromobacter piechaudii, Tsukamurella tyrosinosolvens, Pseudomonas fluorescens, Rhodococcus erythropolis, Stenotrophomonas maltophilia, Pseudomonas aeruginosa genera. The optimum concentration of hexadecane that allowed high growth was 2.5%. Gas chromatography results show that all strains can degrade approximately half of hexadecane in one week of incubation. All of the strains have alkane hydroxylase gene which are important for biodegradation. As a result, this study indicates that there is a high diversity of degradative bacteria in petroleum reservoir waste water in Iran.  相似文献   

Analysis of observed and projected interannual variability in the summer season onset,length, and end dates across the Iran     

Sedaghat  Mahdi  Nazaripour  Hamid 《Theoretical and Applied Climatology》2022,147(1-2):549-558

Theoretical and Applied Climatology - It is very important to study the role of global warming on the variability of summer characteristics in arid and semi-arid climates such as Iran, because of...  相似文献   

Probabilistic Analysis of Ground Surface Vibration Due to Train Movement, a Case Study on Tehran Metro Line 4     

Hamid Reza Nejati  Morteza Ahmadi  Hamid Hashemolhosseini  Mohammad Hayati 《Geotechnical and Geological Engineering》2012,30(5):1137-1146

Ground surface vibration produced by moving train is one of the most important aspects in urban areas. The purpose of this study is the probabilistic analysis of ground surface vibration, which is generated by metro transportations. For this reason, Tehran metro line 4 is considered as a case study. In this paper, at first, a new procedure is used to simulate train dynamic load. In the second step, based on the variation of geomechanical properties and train characteristics in Tehran metro line 4, more than 60 numerical models are simulated. The results of numerical simulations are analyzed by multivariate statistical technique and an equation for prediction of peak particle velocity (PPV) in the ground surface is presented. In the next step, probabilistic analysis is done using Monte Carlo Simulation (MCS). Finally, sensitivity of input data on ground surface vibration is discussed and the impact of geomechanical properties and train characteristics on the surface vibration is considered. Based on the probabilistic analysis, PPV in the surface region of Tehran metro line 4 is <2.76?mm/s with 95?% probability.  相似文献